I've been having trouble getting X-Plane 9 to run at 5040x1050 on my ThripleHead2Go set up. I can run other games like Devil May Cry and World of Warcrft at 5040x1050 just fine. I did have to change the refresh rate of DMC to 57hz before it worked and I wonder if the same is true with X-Plane 9.
My Current set up is as follows:
(3) 20" Dell E207WFP
TripleHead2Go Digital edition
NVIDIA Driver version 175.19
My SGU Profile:
Code:
;KEYWORDS:
; #MATROXH (Replaced with User selected Resolution Height)
; #MATROXW (Replaced with User selected Resolution Width)
; #RESDEPENDENT._ (Replaced by a value based on the selected resolution)
[GAMEINFO]
GAMELOC=D:X-Plane 9X-Plane.exe
GAMEEXE=X-Plane.exe
LATESTPATCHREQ=
MSG1=
REGKEYMUSTEXIST=
SHORTCUTICON=
SHORTCUTNAME=X-Plane 9.00
SHORTCUTPARAMETERS=
USERLOC=D:X-Plane 9X-Plane.exe
[GAMERES]
RES=3840x1024
[GAMERESOLUTIONS]
Min=
Max=
;Registry modifications must be in the following format:
;Registry KeyPath, Registry Name, Registry Data, Registry Type (Ex: REG_SZ, REG_DWORD, REG_BINARY)
;Usable KEYWORDS- #MATROXH, #MATROXW, #RESDEPENDENT.1, #RESDEPENDENT.2 ...
[Registry]
;Config Name To Be Reference (Ex: CFG.1) = Cfg path (Ex: GameConfigFolderGameCfgFile.cfg)
;Usable KEYWORDS- See creating a recipe documentation.
[CFG]
CFG.1=D:X-Plane 9OutputpreferencesRes X-System.prf
CFG.2=D:X-Plane 9OutputpreferencesSet X-Plane.prf
;Usable KEYWORDS- #MATROXH, #MATROXW, #RESDEPENDENT.1, #RESDEPENDENT.2 ...
[CFG.1]
_x_res_req=#MATROXW
_y_res_req=#MATROXH
[CFG.2]
_FOV=100.000000
_vert1=1
_vert2=1
[HOWTO]
MSG=
[RESDEPENDENT.1]
1920x480=
2400x600=
3072x576=
3072x768=
3840x720=
3840x768=
3840x960=
3840x1024=
Is there a place I can set the refresh rate? From what I understand the max bandwith of dual-link at 5040x1050 is 57 hz so if it tried to run at 60 I know it shouldn't work.