Widescreen Gaming Forum

[-noun] Web community dedicated to ensuring PC games run properly on your tablet, netbook, personal computer, HDTV and multi-monitor gaming rig.
It is currently 25 Nov 2024, 05:09

All times are UTC [ DST ]




Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 100 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7, 8 ... 10  Next
Author Message
PostPosted: 14 Nov 2012, 06:54 
Offline

Joined: 19 Mar 2007, 16:52
Posts: 7
The HD Triple Stand XL description says "It isn't designed for 1+3 or 5x1 configurations", but the technical specs have "5x1-P Width" as one of the columns. Could someone clarify whether the XL supports portrait mode? I'm looking at using 24" displays.


Top
 Profile  
 


PostPosted: 15 Nov 2012, 02:15 
Offline
Founder
Founder
User avatar

Joined: 13 Oct 2003, 05:00
Posts: 7358
KayDat wrote:
The HD Triple Stand XL description says "It isn't designed for 1+3 or 5x1 configurations", but the technical specs have "5x1-P Width" as one of the columns. Could someone clarify whether the XL supports portrait mode? I'm looking at using 24" displays.

The HD Triple XL only comes with three pivots, so there isn't enough hardware for a 5x1-P. I've got a couple of extra pivots you could purchase, if you wanted to do 5x1-P with the HD Triple XL and only have a short pole. It will do 3x1-P with the included hardware.


Top
 Profile  
 
PostPosted: 15 Nov 2012, 05:07 
Offline

Joined: 19 Mar 2007, 16:52
Posts: 7
How much are the pivots each? Looking in to freight forwarders atm to try and defray some of the costs since I'm from Aus. I might end up buying a triple monitor stand for $169 locally for my middle three monitors, and use my current desk mounted stands for my side monitors. Heck of a lot cheaper, but no where near as smooth.


Top
 Profile  
 
PostPosted: 15 Nov 2012, 15:56 
Offline
Founder
Founder
User avatar

Joined: 13 Oct 2003, 05:00
Posts: 7358
I happen to have two extra pivots I could add for $25. That would put you $25 less than the WSGF Edition.


Top
 Profile  
 
PostPosted: 27 Nov 2012, 03:10 
Offline

Joined: 27 Nov 2012, 03:05
Posts: 1
I have been looking for a triple monitor stand that can fit 3 27" Crossover 2720MDP GOLD LED PIVOT monitors. Would either of these stands be sufficient enough to support them? I'd like some reassurance before I commit.


Top
 Profile  
 
PostPosted: 21 Dec 2012, 14:07 
Offline
Insiders
Insiders
User avatar

Joined: 06 Sep 2011, 09:29
Posts: 552
Location: Haarlem, the Netherlands
Would like to buy the Heavy Duty Quad stand through WSGF so I can put 3 (3xu2311h) over 1(u2913wm). As far as I can see this would fit, do you guys agree? Also would like to know how long it will take to ship it to the Netherlands?

_________________
Philips BDM4065UC(3840x2160) Acer Z35(2560x1080@200hz); 980 Ti Hybrid @stock ; 6700K 4.6ghz (1.35v)/D15; 16GB 3200mhz; Asus Maximus Ranger VIII; AX860; 1TB 960 EVO; 750GB 840 EVO; Teufel Concept D 500; Sennheiser HD6XX; Windows 10 (latest build)


Top
 Profile  
 
PostPosted: 02 Jan 2013, 16:48 
Offline
Editors
Editors
User avatar

Joined: 06 Mar 2008, 17:20
Posts: 3424
Happy buyer here, I ordered a Triple XL from France. Package posted 12/15, received 12/28. Had to pay an extra 67€ VAT/customs tax upon delivery.

I had been using an Aavara VS743 for a year. Excellent value, but ultimately it's a mistake for an avid multi-mon gamer not to buy the best stand possible right away. Just like you buy monitors that will last through multiple GPU upgrades, a stand should last through monitor upgrades.

The Triple XL is not only bigger, it's better in every way.
The base is HUGE and super stable: no need for a third hand to secure the stand when you're mounting that third monitor. Maybe it's a bit slippery though, so that the entire stand tends to move on the desk when you manipulate the screens or branches. Adhesive rubber pads would have been nice.
The five-segment bar is a godsend. Just make sure to tighten the screws before mounting it on the pole, they're very loose out of the box and you want the branches to stay in position as you attach and adjust the screens.
16:9 24" is a bitch, even moreso with the Acer GD245HQ's massive bezels, so three of these hardly fitted side-by-side on the Aavara stand. Had to make the center screen overlap the other two to "fold" my triple-display into a natural angle. It's all over now and I can finally enjoy bezel-compensated games on a continuous display surface.
For some reason my right panel was also noticeably lower than the other two on the Aavara stand, and the Triple XL's clever height adjustment system fixed that too !

Thank you Messrs. Ergotech & Clarke :wave:


Top
 Profile  
 
PostPosted: 12 Jan 2013, 10:42 
Offline

Joined: 19 Jul 2005, 20:18
Posts: 8
I have a question regarding this stand.

Can I use it a dual stand? I want to use a Dell U3011 in landscape mode and a Dell 2007FP in portrait mode, is this possible?

In the future I might add another 2007FP, but for now dual.

Thanks in advance!


Top
 Profile  
 
PostPosted: 12 Jan 2013, 16:23 
Offline
Founder
Founder
User avatar

Joined: 13 Oct 2003, 05:00
Posts: 7358
Negatruong wrote:
I have been looking for a triple monitor stand that can fit 3 27" Crossover 2720MDP GOLD LED PIVOT monitors. Would either of these stands be sufficient enough to support them? I'd like some reassurance before I commit.


The stand was designed to fit 27" monitors. I've not heard of that brand. Look at the physical height and width specs, and then compare to the info on the product page.

Wijkert wrote:
Would like to buy the Heavy Duty Quad stand through WSGF so I can put 3 (3xu2311h) over 1(u2913wm). As far as I can see this would fit, do you guys agree? Also would like to know how long it will take to ship it to the Netherlands?


Yes, that should work. Double check the specs to make sure. I've got 3x U2211H over a U2913WM. I ship US Global Priority. Estimate is 6-10 days, outside of customs clearance.

Xfinity wrote:
I have a question regarding this stand. Can I use it a dual stand? I want to use a Dell U3011 in landscape mode and a Dell 2007FP in portrait mode, is this possible? In the future I might add another 2007FP, but for now dual.

Thanks in advance!

Yes, that should work fine. The stand will be stable with two montors.


Top
 Profile  
 
PostPosted: 12 Jan 2013, 18:06 
Offline

Joined: 19 Jul 2005, 20:18
Posts: 8
Xfinity wrote:
I have a question regarding this stand. Can I use it a dual stand? I want to use a Dell U3011 in landscape mode and a Dell 2007FP in portrait mode, is this possible? In the future I might add another 2007FP, but for now dual.

Thanks in advance!

Yes, that should work fine. The stand will be stable with two montors.[/quote]

Thanks the reply and me not having anymore headache with all information I have about different monitor stands. You will soon get a order from me ;).


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 100 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7, 8 ... 10  Next

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  




Powered by phpBB® Forum Software © phpBB Group