Widescreen Gaming Forum

Didn't 'qoute' b4 reply, so here's a paste
"OK I just took out one of my 6990s and reset the 11.11 driver and its still doing it !
Please help its getting Horrible 1 Fps in tripple Screen Eyefinity but runs perfectly in single monitor
Can someone please give me Simple step by step instructions on how to get Skyrim to work in Eyefinity correctly Please !
i am so computer illiterate..
thxs
Jayson"


I don't know if it will work for you, but I'm using one HD 5870 @ 6000x1080 (bezel comp) with HaYDeN's fix set at 2000 and it works flawlessly exept for reading books and moving the map pointer around. Still it performs amazingly well on Ultra AA=off AF=16 and view distance (all) 75% of max

_________________

@cp_clegg I have it working fine with bezel correction. Edit the NEW.CT file in notepad and change the triple monitor rez's to your total rez (default is 5040), then divide by 3 and use that to change the single monitor rez (default is 1680). Do a "replace all" with each of those values. I had to tweak the single monitor number a little bit further, which I did by shooting arrows into a wall and changing the resolution until they aligned with my reticle.

@Helifax, I'm not sure if this has already been discussed, but the "-" view setting for two-paged books works for me. However, single pages (notes, bounties, etc.) have about 40% of the text spilling off the left side of the paper and not shown. This happens with any Dark Brotherhood assassin's note, for example.

[quote]I am really hoping that HaYDeN can get that new fix out - because I just love his existing fix. Mad thanks to him and Helifax and all who have worked on this.

In the meantime I noticed a lot of people complaining that CrossfireX is not working or is giving poor performance. I fooled around with it a lot and found a configuration that works for me. I was frustrated that it seemed very sluggish and stuttery.

I run 5760x1200 (3 x 28") on dual 2GB 6950's, core i7 (920), 12GB ram, dual SSDs in RAID-0. Should be fast. It wasn't.

Look at this post:
http://forums.guru3d.com/showpost.php?p=4159680&postcount=118

There is a version of the drivers posted there, install that. Make sure you have CAP3 installed, NOT CAP4.

Install RadeonPro and do as the guy says - set it to TES IV profile and make sure Surface Optimization is turned off, CatalystAI on full and CF mode to AFR.

Using the RadeonPro tools I can see that both VPU's are being used, and I get much better framerate than before. Plus it is just obviously smoother. Before, with no tweaks, I was getting 20-25 fps with "High" settings. Now I am running on Ultra and getting 40-50 fps which is plenty fine. I set the shadows to Medium because many people are saying that this setting is bugged and works opposite to how its labeled. I find the shadows look much better.

I also found that after I applied the >2GB fix (there are a few different ones) I have not had one single CTD. I was getting those every 20 minutes or so before

Really, if HaYDen can get books and maps fixed, I will be in heaven.

Thanks for the tip! I have done some more crossfire testing with 2x6850 and had no luck with CF/eyefinity. CF works for me, but with about 0% scaling, and Radeon Pro shows 40-60% utilization.

I will follow the instructions on that post and report back.

Looking forward to trying Halifax's new fix. The ability to toggle to x1 or x3 should bring the best of everythng.


This did not work w/ crossfire 6850s. Same issues with crossfire as before. Poor scaling in single screen mode, hangs and stutters in eyefinity. I'm going to wait for AMD drivers.

helifax, I just want to say your latest three option (center, stretch, read) fix is amazing. I switched from Hayden's to this. I just opened the CT file in notepad and edited the config for 5760x1080 and it's working flawless. Thank you and Bethesda owes you some of the $60 I spent on the game!

ACK! I didn't even try that. I tried it myself and it's working just fine! Thanks boink for that and THANK YOU helifax!

Attached files

5760.rar (2.7 KB)

_________________
Azza Fusion 4000 Liquid Cooled Full/Mini-ITX Tower - AMD Ryzen 1700x CPU - Tt Water 3.0 Ultimate CPU Cooler - ASUS ROG Crosshair VI Extreme - 2x EVGA GTX 980 in SLI - Geil 16GB - Klipsch 5.1 THX Speakers - Vertex 4 128GB SSD, Sandisk 256GB SSD, Samsung 512GB 850 PRO SSD, WD Black 320GB & Two times Toshiba 5TB (one for Games and the other for Storage) - Logitech G502 - Corsair K65 RGB - Logitech G13 - Win10 Pro 64bit - 2-over-1 Viewsonic VA2448M 24" (2x 1920x1080 Secondary) & Samsung CHG90 Series Curved 49" (3840x1080) - Ergotech Monitor Stand - Shout out to WSGF for the upgrade on my stand!

duplicate

Now all we need is a way to make it switch automatically, based on what menu is open :)


should be able to be implememented ? maybe ? :P

_________________
I7 920, ex58ud3r, crossfire 5870, 3x27" @ 6016x1080, 6gig corsair

Books work with fix, but scrolls are uncentered and image is cut in half, like its trying to fit on a book. I wonder if doubling the size of the scroll model would do it? Im betting to "tell" the game we are opening a scroll and not a book is impossible... so I suppose another hotkey to switch it (like the hot key for books) is the fastest fix we can expect.

So has Hayden abandoned this project?

So has Hayden abandoned this project?

He has work i think he said.


anyway Helifax, can you work out a way to change the mode automatically ?

something like an "if" statement

if 33266fc01 then press 1
else press 2

else press 3

hehe something like that to read whats in memory and change

Surely there is a better programmer here.

_________________
I7 920, ex58ud3r, crossfire 5870, 3x27" @ 6016x1080, 6gig corsair

STILL NEED HELP THXS GUYS


Hey guys ! BIG ISSUE ... I am running Duel 6990s 4 gigs .. 11.11 up date , just got skyrim today .. but when i change the SKYRIMPREFS.ini file and change the values to 5900 x 1080 or 5760 x 1080 ..
it loads up And then runs at like 1 FPS !!! i disabled one of the 6990s and it still did it ...
I tryed the Skyrim ultra Wide FIX program in your guys link and its not working correctly... I change it to 1920 then Execute .. and start the game but only my center monitor starts up and the other two side monitors go black!
can someone help me figure this out

my pc specs :
duel: Quad core 1100 T x 6
duel :6990s 4 gig
16 gig ram
1, 500 gig Hd
9, 1.5 Tb drives
Server mother board.
Anyway
Please help me figure this out ! thanks you guys are the best !

Jayson