Widescreen Gaming Forum

Ordered a Fury X. Impatiently waiting.

In the meantime, I've been trying to finger out what connectors/adapters i may need to run my DVI-DP-DVI screens. By the sounds of the Wiki article snippet I found, it seems that i won't need any Active Adapters. I can run DP to DP for the centre, and passive DP-DVI cables for the sides? Or, one DVI to DVI and one HDMI to DVI? I've been able to avoid requiring and Active adapter thus far on my 5870, 6950, and 7970s... But those all had DVI outs.

That's a good question.
I honestly don't know.
But i would recommend using 2x DP-> DVI cables instead of one HDMI one DVI. You still have the HDMI port free if you want to connect a TV / AVR for Music only, and if one Dp-> DVI cable works the chances are high the 2nd one also works.

_________________
We gonna send it to outa space!

I already have an HDMI-DVI, and I ordered a passive DP-DVI from Monoprice... so we'll see next week.m It'd be pretty lame to have a fresh new card, and no way to run EF for a bit, but I'm not to keen on shelling out $60+ for two adapters I may not need, Or are they cheaper now? I haven't looked into Actives for 5 years. I swore I already had an active DP-something, but hell if i can find it.

I asked this on the AMD Community forums, and he says that passives will work. I sure hope he's right.

Got another response:



So it seems to be the same as previous cards. And teh Actgive i already had is a mini-dp to DVI, so I've ordered an Accell adapter to connect my TV as well.

Well, they were correct. Running EF on passive DP-DVI, DP-DP, Active DP-DVI, and TV is connected HDMI-HDMI. So yes, requires same setup as previous cards. Yay.

I bought an Accell Active adapter. a bit pricey, but it seems to be the most reliable.