Widescreen Gaming Forum

[-noun] Web community dedicated to ensuring PC games run properly on your tablet, netbook, personal computer, HDTV and multi-monitor gaming rig.
It is currently 14 Dec 2024, 04:46

All times are UTC [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: 27 Sep 2008, 04:19 
Offline
Insiders
Insiders

Joined: 07 Nov 2005, 04:16
Posts: 3010
I got a new PC this week. The case apparently has two connectors for the front audio - one labeled "AC 97" and one labeled "HD Audio." What's the difference between these two connectors? And which one do I use?

This is my system board:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128337


Top
 Profile  
 


PostPosted: 27 Sep 2008, 04:39 
Offline

Joined: 24 Jun 2006, 09:01
Posts: 96
I am no audio expert but I think AC97 is Intel's audio codec (began in 1997 as the name implied) but was later (around 2004/2005?) superseded by Intel's HD Audio (High Definition).

In the days of 90's, people basically listened to stereo music (2-channel music CDs) and AC97 was designed for that. But as surround sound gains popularity (particularly in movie DVDs), AC97 couldnt keep up and so Intel used HD Audio to replace the AC97.

So, I suppose if you use only 2 front speakers, the two shouldnt have much difference. But if you have 5.1 or 7.1 multi-speakers setup, use the HD Audio.


Top
 Profile  
 
PostPosted: 27 Sep 2008, 05:14 
Offline
User avatar

Joined: 09 Apr 2007, 14:39
Posts: 578
I am no audio expert but I think AC97 is Intel's audio codec (began in 1997 as the name implied) but was later (around 2004/2005?) superseded by Intel's HD Audio (High Definition).

In the days of 90's, people basically listened to stereo music (2-channel music CDs) and AC97 was designed for that. But as surround sound gains popularity (particularly in movie DVDs), AC97 couldnt keep up and so Intel used HD Audio to replace the AC97.

So, I suppose if you use only 2 front speakers, the two shouldnt have much difference. But if you have 5.1 or 7.1 multi-speakers setup, use the HD Audio.


Actually, that's incorrect. AC'97 is a product of Realtek, and is still manufactured with AC'97 being the name of the processing chip, but with monkiers like "HD" or "5.1" being added on when they upgrade the chip to incorporate high frequency (96/192kHz) processing, or 5.1 output respectively.

HD Audio is a product of Intel, which is going into direct competition with the AC'97 onboard audio solution. Intel wanted either to save money on their own motherboard manufacturing or they wanted another market they could make some sort of money out of and the onboard audio market was one that was relatively untapped by anyone other than Realtek.

So here we are, every non-intel mobo out there with AC'97 onboard audio, either HD or more commonly now, 5.1 version installed, or the intel mobos, with their own proprietary audio processing chip onboard.

The reason there are 2 different connectors, is each chip uses the same 2x5 pinout, however, the key (blank) is different and the output/input pins are also different, as Realtek would have probably tried to sue the pants off Intel with whatever they could. The key pin on Intel's HD audio is pin 2, Realtek's AC'97 is pin 4 (if my memory serves me correctly). And again, the pins and what they do are all different. So really, it's just 2 competing onboard chips, and it's up to if you have an intel board or not, and if you don't, then don't even look at the HD Audio plug, you more than likely have the Realtek chip, and need to use the AC'97 plug.

This plug and pinout is for the front audio, which typically is just Front L/R for plain stereo output, and a mic input (stereo pin connections are available, but typically needs to be selected as such in audio control).

_________________
Current build: Intel i5-4670k | 32GB DDR3 | RAID0 2x250GB 850EVOs | nVidia GTX980Ti (MSI G1 Gaming Edition) | SoundBlaster Zx | Dell 2405FPW (Landscape, primary) & HP w2338h (Portrait)


Top
 Profile  
 
PostPosted: 27 Sep 2008, 19:15 
Offline

Joined: 28 May 2007, 03:10
Posts: 845
Nice info cynagen, so in short use the connector the motherboard manual says? :)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  




Powered by phpBB® Forum Software © phpBB Group