| Widescreen Gaming Forum http://www.wsgf.org/phpBB3/ |
|
| 2D Surround Problem http://www.wsgf.org/phpBB3/viewtopic.php?f=68&t=21282 |
Page 1 of 2 |
| Author: | dylskee [ 07 Jan 2011, 22:46 ] |
| Post subject: | 2D Surround Problem |
Hello all, I decided to give surround gaming a try and I can't seem to get it to work for me. The driver keeps crashing when I try to "Span displays with surround", all the screens flicker and keeps crashing. I wanted to play some COD black ops tonight in surround. I'm running two GTX 285s in SLI and the driver I'm using is 260.99, three 22" widescreen LCDs all running the same resolution and refresh rate. Can someone give me some help on this? Thanks in advance! :cheers |
|
| Author: | ithrial [ 08 Jan 2011, 04:07 ] |
| Post subject: | Re: 2D Surround Problem |
Try reverting back to the 258 or 256 drivers. I had a 50/50 chance when I had my GTX 275s with surround. |
|
| Author: | dylskee [ 08 Jan 2011, 15:39 ] |
| Post subject: | Re: 2D Surround Problem |
Thanks for the reply. I tried a couple different older drivers and all I get is "Input not supported and my other two monitors go black. |
|
| Author: | thales100 [ 08 Jan 2011, 16:11 ] |
| Post subject: | Re: 2D Surround Problem |
Which monitors are you running ? |
|
| Author: | dylskee [ 08 Jan 2011, 19:56 ] |
| Post subject: | Re: 2D Surround Problem |
I've got a Dell 2209WA, Chimei and an Acer. Three different kinds but all running the same res and refresh. From what I've read so far different brands is not a problem for 2D surround but for 3D surround you need to be matched, correct? |
|
| Author: | thales100 [ 08 Jan 2011, 20:10 ] |
| Post subject: | Re: 2D Surround Problem |
I've got a Dell 2209WA, Chimei and an Acer. Three different kinds but all running the same res and refresh. From what I've read so far different brands is not a problem for 2D surround but for 3D surround you need to be matched, correct? In theory yes, but ive seen some ppl here at WSGF with issues when running three different monitors + NV Surround, even if with the same res and refresh rate, can you check the model numbers of the Chimei and Acer ? |
|
| Author: | dylskee [ 08 Jan 2011, 20:59 ] |
| Post subject: | Re: 2D Surround Problem |
I was hoping to do this without buying two more monitors but looks like I'm going to have to huh? The model numbers are: Chimei A220Z1-H01 Acer X223W |
|
| Author: | Paradigm Shifter [ 08 Jan 2011, 23:19 ] |
| Post subject: | Re: 2D Surround Problem |
The biggest issue is that the sync polarities are the same for all three monitors, while it's only a +ve or -ve option, most manufacturers don't advertise the sync polarities, and therefore you're flying in the dark with it. It's really important but nVidia just kind of mention it in passing. I would suggest that with three different monitors, one of them isn't the same sync polarity as the other two. Which is the problem. :( |
|
| Author: | thales100 [ 08 Jan 2011, 23:34 ] |
| Post subject: | Re: 2D Surround Problem |
The biggest issue is that the sync polarities are the same for all three monitors Qft, from nvidia 3D surround system requirements page : All displays must have a common resolution, refresh rate, and sync polarity http://www.nvidia.com/object/3dv-system-requirements-surround-technology.html |
|
| Author: | dylskee [ 09 Jan 2011, 00:00 ] |
| Post subject: | Re: 2D Surround Problem |
Thanks for the info! Anyway to find out what the polarity is for each monitor? I'm going to assume my 2209WA has a different polarity seeing how it is a TN panel. The Chemei is an Acer rebranded I'm sure. |
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|