Widescreen Gaming Forum http://www.wsgf.org/phpBB3/ |
|
SoftTH, DDO and Vista 64 http://www.wsgf.org/phpBB3/viewtopic.php?f=68&t=17009 |
Page 1 of 2 |
Author: | Furyous [ 13 Feb 2009, 03:45 ] |
Post subject: | SoftTH, DDO and Vista 64 |
I am trying to run SoftTH with DDO on Vista 64 and I am running into problems. I have tried tweeking everything in the config file with the same results. If I don't hard set the resolution in the configuration file, I can start the game up and choose 5860x1200 and it shows the resolution for about a second before the game freezes. If I do hard set the resolution in the configuration file then the game crashes on loading. I have a TH2Go but it has horrable resolution on my system (ATI). I would prefure to use SoftTH for the full 5760x1200 resolution. Here is the error I see in the log file: Code: 2.918 SoftTH: Monitor left: -1920x0 2.918 SoftTH: Monitor right: 1920x0 2.918 SoftTH: Focus window: 394658 'Dungeons and Dragons Online' 2.918 SoftTH: Creating window (pos 1920x0, size 1920x1200) 2.980 SoftTH: Creating device right.. 3.354 SoftTH: Main device lost during right device initialization 3.354 SoftTH: initStuff, Reset main device 3.354 SoftTH: 3.354 SoftTH: Reset main device (1920x1200) FOO 3.354 SoftTH: Releasing additional surfaces 3.354 SoftTH: copySurf: Releasing shaders & buffers... 3.432 SoftTH: Creating window (pos 1920x0, size 1920x1200) 3.479 SoftTH: FATAL, exception EXCEPTION_ACCESS_VIOLATION (0) occured at address 0x0 at function Reset 3.479 SoftTH: FATAL, exception EXCEPTION_ACCESS_VIOLATION (0) occured at address 0x0 at function initStuff 5.616 STHook: Hooks: Detached |
Author: | Mesh [ 13 Feb 2009, 21:43 ] |
Post subject: | SoftTH, DDO and Vista 64 |
DDO? |
Author: | P-Storm [ 14 Feb 2009, 00:11 ] |
Post subject: | SoftTH, DDO and Vista 64 |
A wild guess from me is that it is Dungeons & Dragons Online |
Author: | Furyous [ 14 Feb 2009, 03:29 ] |
Post subject: | SoftTH, DDO and Vista 64 |
Correct |
Author: | kodex [ 14 Feb 2009, 06:32 ] |
Post subject: | SoftTH, DDO and Vista 64 |
My suggestion would be to set 'altResetBehaviour' to 1, as that's what the readme suggests for your problem. Assuming that you've already done that, try changing your graphics drivers. Use the ones for XP and run them in SP2 Compatibility Mode, which should allow you to avoid this problem. |
Author: | Furyous [ 14 Feb 2009, 07:41 ] |
Post subject: | SoftTH, DDO and Vista 64 |
My suggestion would be to set 'altResetBehaviour' to 1, as that's what the readme suggests for your problem. I did try the 'altResetBehaviour' to one and that didn't help, I am not sure about the XP drivers on Vista 64. That seems like it would cause more problems then it would solve? |
Author: | Furyous [ 15 Feb 2009, 09:05 ] |
Post subject: | SoftTH, DDO and Vista 64 |
New error message: =================================================== 42.260 SoftTH: GetRenderTargetData/copyRects/cudaCopyFromDevice SH->B failed! 42.292 SoftTH: GetRenderTargetData/copyRects/cudaCopyFromDevice SH->B failed! 42.323 SoftTH: GetRenderTargetData/copyRects/cudaCopyFromDevice SH->B failed! 42.354 SoftTH: GetRenderTargetData/copyRects/cudaCopyFromDevice SH->B failed! 42.370 SoftTH: GetRenderTargetData/copyRects/cudaCopyFromDevice SH->B failed! 42.401 SoftTH: GetRenderTargetData/copyRects/cudaCopyFromDevice SH->B failed! 42.432 SoftTH: GetRenderTargetData/copyRects/cudaCopyFromDevice SH->B failed! 42.448 SoftTH: Added mode 2400x600 f16 42.448 SoftTH: Added mode 3072x768 f16 42.448 SoftTH: Added mode 3840x960 f16 42.448 SoftTH: Added mode 4800x1200 f16 42.307 STHook: Returning: 3840x1024 42.463 SoftTH: 42.463 SoftTH: Reset main device (800x600) 42.463 SoftTH: Releasing additional surfaces 42.463 SoftTH: copySurf: Releasing shaders & buffers... 42.463 SoftTH: Requested mode 800x600 not triplehead 42.307 STHook: Returning: 3840x1024 67.189 STHook: Hooks: Detached 67.345 SoftTH: ProxyDLL deinit (C:Program Files (x86)TurbineDungeons & Dragons Online - Stormreachd3d9.dll) 67.345 SoftTH: RELEASE HOOK! <"C:Program Files (x86)TurbineDungeons & Dragons Online - Stormreachdndclient.exe" ... 67.345 SoftTH: ERROR: Mouse hook release failed 67.345 SoftTH: ProxyDLL Exit ======================================================== That first line repeats over 100 times. I am not using 32CUDA and I don't see anywhere else has CUDA settings. BTW these are the graphics settings for the game: [Display] SyncToRefresh=True AllowWindowResizing=True WindowedResolution=124781678 ConfineFullScreenMouseCursor=True AllowFakeFullScreen=False ForceFakeFullScreen=False FullScreen=True RefreshRate=Auto TripleBuffering=False AllowDesktopCompositing=False Antialiasing=Disabled Resolution=1920x1200 |
Author: | Furyous [ 16 Feb 2009, 01:02 ] |
Post subject: | SoftTH, DDO and Vista 64 |
I am really stuck on this one and the TH2Go resolution just doesn't cut it. I want this to work so bad I am willing to paypal $20 to whomever can get it working for DDO under Vista 64. There is a free trial of DDO so if you want to try it out you can. I am so close, I can get it running in triplehead for 5 seconds before it crashes, so I am pretty sure it can work, I just can't find the right settings. So far I have gone through the read me and changed everything in the config file at least once to test and tried many combination of changes. I have a ton of log files and the last few look like it's the SoftTH that is crashing as the logs stop abruptly at the end. |
Author: | Furyous [ 18 Feb 2009, 07:03 ] |
Post subject: | SoftTH, DDO and Vista 64 |
I got Fallout 3 working at 5760x1200 with very little problem. After turning down the AA and a few other settings I was able to get a great picture at 30+FPS. I know my system can handle it now, I just need to figure out how to get DDO working with it. here is the settings that work with Fallout 3: Code: [config] deviceIDLeft=auto deviceIDright=auto secondaryWidth=1920 secondaryHeight=1200 secondaryRefresh=auto secondaryFormat=RGB16D uploadMethod=blit forceAffinity=0 borderSize=0 sideExtraWidth=auto noHotkeys=0 noOSD=0 [Direct3D] lensCorrection=0 lensCorrectionEdge=0 hideNondefaultDevices=0 forceHorizontalFOV=0 forceResolutionWidth=1920 forceResolutionHeight=1200 force16bitDepth=0 sleepBeforeRead=2 useMultihead=0 delayedPresent=0 autoSquash=0 altResetBehaviour=0 d3d8dll=auto [hooks] use X resolution doHooking=1 doScaleMouseCoordinates=0 doScaleFromLeftScreen=0 doScaleWindowRects=1 doScaleClientRects=0 mouseXoffset=auto [modes] 800x600x60 800x600x75 800x600x85 1024x768x60 1024x768x75 1024x768x85 1280x960x60 1280x960x75 1280x960x85 1280x1024x60 1280x1024x75 1280x1024x85 1600x1200x60 1600x1200x75 1600x1200x85 1920x1200x60 auto and these are the settings for the game preferences: Code: [International]
UseIME=False [Display] AllowWindowResizing=True WindowedResolution=124781678 ConfineFullScreenMouseCursor=True AllowFakeFullScreen=False ForceFakeFullScreen=False FullScreen=True TripleBuffering=False AllowDesktopCompositing=False Antialiasing=Disabled SyncToRefresh=False RefreshRate=Auto Resolution=1920x1200 [Sound] AmbientVolume=1.00 SoundVolume=1.00 DMTextVolume=0.80 SoundProvider=OpenAL CombatVolume=0.80 MaxPlayingSounds=64 MusicVolume=0.50 SoundFeatures=Generic Software on Speakers (Realtek High Definition Audio) UIVolume=1.00 EAXEnabled=False PlayerMusicVolume=1.00 VOVolume=0.80 SoundDisabled=False MusicDisabled=False [WebBrowser] HttpsProxyPort=0 HttpProxyPort=0 HttpProxyHost= InitialConfigDone=True HttpsProxyHost= [Render] ModelDetail=High MemoryUsage=0.30 EnvironmentStencilShadows=False OverbrightBloomFilter=False BlobShadows=True VideoPostEffects=True FarLandscapeNormalMaps=False GraphicsCore=D3D9 Contrast=1.00 SurfaceReflections=Low BlurFilterQuality=Medium MaterialDetail=High DistantImposters=True AllowGammaChanges=True GlowMapping=True AnimationDetail=Medium ObjectDrawDistance=High TextureDetail=High AtmosphericsDetail=Medium AnisotropicQuality=1 MultiPassLighting=True MaxHardwareClass=0 Brightness=1.00 BloomIntensity=1.00 LandscapeLightingQuality=Low ShadowMapQuality=0 LandscapeStaticObjectShadows=Medium DisplayAdapter=0 PlayerCrowdQuality=1.00 FrillDistance=Medium HavePromptedForD3D10AtStartup=True EnablePortraits=True SpecularLighting=True LandscapeShoreEffects=High TextureFiltering=Sharp AlphaToCoverage=False StencilShadows=Medium MeshCombining=True AspectRatio=Auto LandscapeDrawDistance=High Gamma=1.01 [Input] TurnKeySpeed=150.00 InvertMouseLookYAxis=False LMBAttacks=False MouseLookSensitivity=0.10 UsesClassicMouseMapping=True JoystickDeadZone=0.25 PitchKeySpeed=60.00 MouseLookSmoothingAmount=0.00 [Voice] DevicePlayback=C9F79C8C-F4A1-4438-BAE2-974ACA556722 DeviceCapture=070EB304-126A-4141-94BE-07353F6B97E3 MicVolume=1.00 NetworkLatencyThresh=250 HandsFree=False MicCaptureThreshold=0.10 VoiceVolume=1.00 [Camera] AlignToSlope=False ResetYawWhenPlayerMoves=False [Net] BindInterface= ComputeUniquePort=True ConnectionSpeed=0.00 UserSpecifiedPort=0 [Troubleshooting] MaximumFrameRate=121 EngineSpeed=VeryHigh [UI] FloatyTextScale=1.00 FloatyTextOnTop=False [Misc] TooltipEnable=True TooltipDelay=0.30 When I start the game with 5760x1200 resolution setting in the softTH config file, it crashes. If I start it with 1920x1200 and then change the resolution in game, it changes show a great picture then crashes after 3 seconds. Here is the sofTTH log: Code: 0.000 SoftTH: SoftTH v1.09 by Kegetys (D3D9)
0.000 SoftTH: Module: C:Program Files (x86)TurbineDungeons & Dragons Online - Stormreachd3d9.dll ("C:Program Files (x86)TurbineDungeons & Dragons Online - Stormreachdndclient.exe" -a qjceplm3rfelwly cwytnwlmft -h 208.94.52.173:9008 --glsticketdirect eNdrYUbe+A/HFpyb+YssYcWfvuTkRg6T8XSM0ml0UGQ6BY2eVbAj8f DK2JBBhvYSjEEOS1KRLYFZVX4ffCD6XiEi9Oz8UhTj42xjBk2Jodcmif7Kt4+4WanhrrRcB/N2cyO1/c+CPIqE0wQqJExq86QqJaAle8U FzwJu2+FZKit8JFtLiFVDzGMY/ggAZQh+Nh2zKUBNh710WRPhaHzXUqeeKWVHyqH9hoeHdudFMOu8mXi+QFR5Bb9t1pXbIvud --chats erver 208.94.52.174:2900 --language English --supporturl https://tss.turbine.com/TSSTrowser/trowser.aspx --gametype DDO --supportserviceurl https://tss.turbine.com/TSSTrowser/SubmitTicket.asmx --authserverurl https://gls.ddo.com/GLS.AuthServer/Service.asmx --glsticketlifetime 80000) 0.000 SoftTH: Loading configuration C:UsersAlbertSoftTH.cfg 0.000 SoftTH: Loading configuration C:Program Files (x86)TurbineDungeons & Dragons Online - StormreachSoftTH.cfg 0.047 SoftTH: Left monitor ID autodetected as 1 0.047 SoftTH: Right monitor ID autodetected as 2 0.078 SoftTH: sideExtraWidth autodetected as 0 (1920x1200 / 1920x1200) 0.078 SoftTH: Added auto resolution 1920x1200 60Hz 0.078 SoftTH: Activating Win32 hooks... 0.000 STHook: Hooks: Attached 0.078 SoftTH: Direct3DCreate9 (ver 32) 0.109 SoftTH: Adapter 0: atiumdag.dll, ATI Radeon HD 4800 Series with SoftTH v1.09 by Kegetys (D3D9) 0.109 SoftTH: Adapter 1: atiumdag.dll, ATI Radeon HD 4800 Series 0.109 SoftTH: Adapter 2: atiumdag.dll, ATI Radeon HD 4800 Series 0.187 SoftTH: Added mode 2400x600 f16 0.187 SoftTH: Added mode 3072x768 f16 0.187 SoftTH: Added mode 3840x960 f16 0.187 SoftTH: Added mode 4800x1200 f16 2.917 SoftTH: Added mode 2400x600 f16 2.917 SoftTH: Added mode 3072x768 f16 2.917 SoftTH: Added mode 3840x960 f16 2.917 SoftTH: Added mode 4800x1200 f16 2.917 SoftTH: 2.917 SoftTH: CreateDevice 1920x1200 0Hz 21bf 75df 0/0ms 2.917 SoftTH: Focus window: 'Dungeons and Dragons Online' 2.917 SoftTH: Overriding resolution to 1920x1200 2.917 SoftTH: Requested mode 1920x1200 not triplehead 2.917 SoftTH: Using D3DCREATE_FPU_PRESERVE 2.917 SoftTH: 1 backbuffer(s): 1920x1200 2.917 SoftTH: SwapEffect 1, PP Flags 00000000, Behaviour Flags 00000042 2.948 SoftTH: Empty device reference count: 1 2.948 SoftTH: Standard mode: 1920x1200 2.948 SoftTH: Releasing surfaces... 2.948 SoftTH: Releasing devices... 2.964 SoftTH: Video memory used: 8.79MB 2.964 SoftTH: InitStuff done 2.964 SoftTH: CreateDevice return (1920x1200) 338.475 SoftTH: Added mode 2400x600 f16 338.475 SoftTH: Added mode 3072x768 f16 338.475 SoftTH: Added mode 3840x960 f16 338.475 SoftTH: Added mode 4800x1200 f16 338.475 SoftTH: 338.475 SoftTH: Reset main device (5760x1200) 338.475 SoftTH: Releasing additional surfaces 338.475 SoftTH: copySurf: Releasing shaders & buffers... 338.475 SoftTH: Triplehead mode requested (5760x1200 0Hz), enabling TH 338.569 SoftTH: Reset OK 338.569 SoftTH: Creating additional device windows 338.569 SoftTH: Monitor left: -1920x0 338.569 SoftTH: Monitor right: 1920x0 338.569 SoftTH: Focus window: 1509868 'Dungeons and Dragons Online' 338.569 SoftTH: Creating window (pos -1920x0, size 1920x1200) 338.600 SoftTH: Creating window (pos 1920x0, size 1920x1200) 338.647 SoftTH: Creating device left.. 339.411 SoftTH: Creating device right.. 339.879 SoftTH: initStuff, Reset left device 339.911 SoftTH: initStuff, Reset left device done 339.911 SoftTH: Main device lost during right device initialization 339.911 SoftTH: initStuff, Reset main device 339.911 SoftTH: 339.911 SoftTH: Reset main device (1920x1200) FOO 339.911 SoftTH: Releasing additional surfaces 339.911 SoftTH: copySurf: Releasing shaders & buffers... 340.004 SoftTH: Reset OK 340.004 SoftTH: Reset return main device (1920x1200) FOO 340.004 SoftTH: initStuff, Reset main device done (A) 340.067 SoftTH: GetBackBuffer.. 340.067 SoftTH: Creating additional surfaces 340.067 SoftTH: Create new backbuffer... (5760x1200, f21, ms0-0) 340.067 SoftTH: Creating depth buffer.. (5760x1200, f75 ms0-0) 340.067 SoftTH: Creating tmpTex (3840x1200, f21)... 340.067 SoftTH: Creating tmpSurfSH (3840x1200, f23)... 340.067 SoftTH: Creating tmpTexB (3840x1200, f23)... 340.067 SoftTH: Triplehead: cr: 1920x1200, sr: 1920x1200 340.129 SoftTH: Video memory used: 8.79MB 340.129 SoftTH: InitStuff done 340.129 SoftTH: copySurf: Initializing 340.129 SoftTH: Reset return main device (5760x1200) 340.129 SoftTH: numRefsFreeDevice: 8 342.173 SoftTH: createQuad: Creating new buffer 0x0 - 3840x1200 (0/8) 342.173 SoftTH: numRefsFreeDevice increased by 4 |
Author: | Furyous [ 21 Feb 2009, 08:07 ] |
Post subject: | SoftTH, DDO and Vista 64 |
This turned out to be a problem with Vista 64, deleted Vista, installed XP all works great now |
Page 1 of 2 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |