Widescreen Gaming Forum

Hi,
I have XFX HD5850

From left to right
DVI -> VGA : 1024*768
DP -> Wicked Wired Active DP to DVI adaptor -> DVI : 1920*1200
DVI: 1280*1024

The issue is whenever I shut down for more than 2 hours, when I boot up again, the DP cannot be recognized. I have to replug the DP adaptor in order for it to recognize.
It becomes extremely annoying as every day I got home I have to bend down below my desk and replug the dp at the back.

Tried all sorts of USB port, onboard, pci, external, don't seem to be power issue
updated drivers, bios, motherboard bios, nothing changed

Motherboard: Asus P5B Premium Vista Edition

I am running out of options to test, please provide suggestions/solutions...

Thank you

I find that I have to power cycle my adapters constantly. Since I plugged each one into my monitors usb hubs, it's as easy of turning off my monitors.

_________________
System Core: | Intel Core i5-2500K + ASUS P8Z68-V + 16GB Corsair XMS3 DDR3 1333 MHz | Win7 x64 | MSI R7970 Lightning 3GB [1105/1400] |
Display: | 3 x Dell Ultrasharp 3007WFP-HC @ 7680x1600 | Dell u3011 |

thanks for your reply, but i dont have a usb hub in my monitor. Is there anyway I can solve this without repluging or power cycle?

Not to my knowledge.

_________________
System Core: | Intel Core i5-2500K + ASUS P8Z68-V + 16GB Corsair XMS3 DDR3 1333 MHz | Win7 x64 | MSI R7970 Lightning 3GB [1105/1400] |
Display: | 3 x Dell Ultrasharp 3007WFP-HC @ 7680x1600 | Dell u3011 |

I've actually had the same problem. I have a different brand of adapter, but it seems to be the same type. (Mine's an XFX.) Sometimes, it would recognize my monitor, but there would be issues. I wouldn't be able to change the resolution to anything higher than 1024x768, it would act like the monitor was disconnected when I'd go to boot up a game...could never tell if it was my card of the adapter that was shitting the bed.

_________________
■ AMD Phenom II X4 965 Black Edition 3.4GHz

■ ASUS M4A77TD

■ XFX Radeon HD 5850 (Cypress Pro) 1GB Black Edition

■ OCZ Agility 2 64GB SSD

■ Samsung Spinpoint 1TB

■ OCZ 4GB DDR3 1600

■ CORSAIR 750TX

■ Razer DeathAdder

■ 3 x HP 2009m LCD Widescreen Monitors (running at 4800x900 in Eyefinity) (SOLD THESE - NOW RUNNING (1) ASUS VE247H 23.5")

■ Turtle Beach Montego DDL Dolby Digital on Logitech Z-5500 5.1

■ Windows 7 x64

I have got an replacement but the same issue still occur. Any suggestions as to what I should do?
I am thinking about getting as monitor with displayport but how can i test and ensure it's not my video card that's not outputing the video?

I have got an replacement but the same issue still occur. Any suggestions as to what I should do?
I am thinking about getting as monitor with displayport but how can i test and ensure it's not my video card that's not outputing the video?

It seems to work when you don't turn off for long periods, so I guess the DP on the card is fine.

When you say you have to replug the adaptor, do you unplug its power connection (USB) or the DP cable from the graphics card?

And does the adaptor get any power from the motherboard when the power is turned off (does a USB mobile phone charge from the same USB socket when PC is turned off?)

_________________
P8Z68-V Pro | 2600K | HR02 | HD5850 | 2x4GB Vengeance LP | 128GB M4 + 6TB | X-Fi > HD595 | AX850 | Tai Chi | PB278Q | G110 + Deathadder 2013
P8Z77-V | 3570K | Mugen 2 | HD5850 | 2x4GB Vengeance LP | 500GB | X-750 | Fractal R3 | U2212HM | G110 + G400
P8H77-I | G860 | 4650 | 2x2GB XMS | 320GB | CX500 | Prodigy | T22B350EW | MX518
DC3217IYE | 1x4GB Vengeance | 64GB M4 | TX-42VT20E