| Widescreen Gaming Forum http://www.wsgf.org/phpBB3/ |
|
| Bezel comp when using a display with vga? http://www.wsgf.org/phpBB3/viewtopic.php?f=66&t=20173 |
Page 1 of 1 |
| Author: | Nedder [ 18 Jul 2010, 19:33 ] |
| Post subject: | Bezel comp when using a display with vga? |
If you use any VGA connections is bezel compensation always disabled? I have a Dell 2007wfp 20", and a Dell 2209wa 22". As is, I already can't do bezel comp with 2 monitors as ATI sees the different sizes, even though the res are the same. If I get the Sapphire DP>VGA adapter will I be blocked from using bezel management even if ATI loosens these stupid restrictions? I'm thinking of selling the 2209wa and looking for a pair of 2007wfp's. |
|
| Author: | Dyre Straits [ 19 Jul 2010, 12:49 ] |
| Post subject: | Re: Bezel comp when using a display with vga? |
If you use any VGA connections is bezel compensation always disabled?...... Short answer: No. I'm using three identical ViewSonic 24 inch LCDs and a DP->VGA adapter. Bezel compensation is working flawlessly here. The restriction is due to the difference in your panels. |
|
| Author: | !TIMMY! [ 01 Aug 2010, 19:40 ] |
| Post subject: | Re: Bezel comp when using a display with vga? |
Do you have 2 connected by VGA and 1 by DP > VGA? That'sw hat I have on 3 identical monitors and I don't seem to have the option to config the bezel management (cat 10.7). |
|
| Author: | Tamlin [ 01 Aug 2010, 19:43 ] |
| Post subject: | Re: Bezel comp when using a display with vga? |
Do you have 2 connected by VGA and 1 by DP > VGA? That'sw hat I have on 3 identical monitors and I don't seem to have the option to config the bezel management (cat 10.7). You need to install the drivers for your screen, so you get above 1600x1200 on the DP -> VGA screen first. If the resolution ain't available for windows, it ain't available for Eyefinity either. :) |
|
| Author: | !TIMMY! [ 01 Aug 2010, 20:53 ] |
| Post subject: | Re: Bezel comp when using a display with vga? |
[quote]Do you have 2 connected by VGA and 1 by DP > VGA? That'sw hat I have on 3 identical monitors and I don't seem to have the option to config the bezel management (cat 10.7). You need to install the drivers for your screen, so you get above 1600x1200 on the DP -> VGA screen first. If the resolution ain't available for windows, it ain't available for Eyefinity either. :) I cant find any drivers for my screen, I just have the Generic PnP Driver installed for all 3. |
|
| Author: | Dyre Straits [ 02 Aug 2010, 08:06 ] |
| Post subject: | Re: Bezel comp when using a display with vga? |
Do you have 2 connected by VGA and 1 by DP > VGA? That'sw hat I have on 3 identical monitors and I don't seem to have the option to config the bezel management (cat 10.7). No, I have two connected using DVI -> DVI; and one using DP -> VGA. My screens are all identical. You might try Removing all the monitors from the Windows Device Manager and then reboot and let Windows re-detect the connected ones. You might also go into Device Manager and do a Driver Update for the monitors and see if Windows detects any newer drivers. Other than than, check the manufacturer for any specific drivers. |
|
| Author: | !TIMMY! [ 03 Aug 2010, 18:03 ] |
| Post subject: | Re: Bezel comp when using a display with vga? |
I turned on my PC this morning and its sorted itself out and I can now confirm I have bezel management working with a Sapphire DP > VGA adapter and 2 DVI, all3 identical monitors. I can tell that the VGA monitor has slightly different colour to the 2 connected by DVI. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|