| Widescreen Gaming Forum http://www.wsgf.org/phpBB3/ |
|
| DP > VGA won't allow 1920 x 1080 http://www.wsgf.org/phpBB3/viewtopic.php?f=66&t=18826 |
Page 1 of 1 |
| Author: | direwolf [ 05 Jan 2010, 00:59 ] |
| Post subject: | DP > VGA won't allow 1920 x 1080 |
My DP to VGA Adapter finally arrived, but when I plug it in 1920 x 1080 isn't selectable. :( It shows 
The monitor is a Benq G2220HDA (it has a VGA input only) When I plug the monitor into one of the DVI sockets on my PC using a VGA>DVI adapter, I can select 1920 x 1080 What to do? The only common settings between my other two monitors (G2220HD - has DVI inputs) is 1440 x 900 or 1400 x 1050 :( 
|
|
| Author: | KryptoNyte [ 05 Jan 2010, 02:52 ] |
| Post subject: | Re: DP > VGA won't allow 1920 x 1080 |
I have the Apple Active DP adapter. A couple of things that I did that "seemed" to clean up some of the Eyefinity issues: 1) I installed Powerstrip. Mind you, I didn't do anything else after installing it, with regard to Powerstrip configurations. Can't really say that this did the trick, but as I fooled more and more, the available resolutions did start appearing. 2) Those of us with the active adapters have the ability to un-plug the powered USB cable with the adapter, and Eyefinity seems to re-detect the screen. This also has positive side effects on some issues. From your standpoint, I would say pulling the VGA cable out hot isn't a good idea (although I've done it many times without problems) - perhaps powering the screen on and off would have a similar effect? One more thing. I have a full HD TV plugged into the HDMI port. The ATI card recognizes all four screens at once, however, on the three LCD monitors that I have plugged in, I ALWAYS use the selections from the BASIC desktop area list (not the HDTV list). Only the HDTV uses that particular list in that particular profile. |
|
| Author: | direwolf [ 05 Jan 2010, 03:01 ] |
| Post subject: | Re: DP > VGA won't allow 1920 x 1080 |
From what I can understand, the display's EDID is not read through the DP adapter so Win7 isn't detecting that this monitor's native resolution 1920x1080. I downloaded Monitor Asset Manager 2.4 from EnTech, but it only detects the two monitors plugged into the DVI ports. Checking the Win7 display properties, it calls this monitor a "Generic Non PnP Monitor" 
There must be some way of telling Win7 that this monitor is capable of 1920x1080? |
|
| Author: | suiken_2mieu [ 05 Jan 2010, 04:36 ] |
| Post subject: | Re: DP > VGA won't allow 1920 x 1080 |
You can install a EDID Mask, there's a thread on how to do it. http://www.widescreengamingforum.com/forum/viewtopic.php?f=64&t=17635 If you need anyother help with Eyefinity here's the breakdown. http://www.widescreengamingforum.com/forum/viewtopic.php?f=64&t=17637 |
|
| Author: | direwolf [ 05 Jan 2010, 05:12 ] |
| Post subject: | Re: DP > VGA won't allow 1920 x 1080 |
You can install a EDID Mask, there's a thread on how to do it. The EDID mask works!!!! I now have 1920x1080 on all three monitors. Thanks :) |
|
| Author: | iacherra [ 18 Jan 2010, 11:32 ] |
| Post subject: | Re: DP > VGA won't allow 1920 x 1080 |
What is the most important of a VGA GPU or the manufacturing brand? I've got a low Branded VGA called Eagle coz a coudnt find a better recommended brand of the 9600GT model !! I had to spend bout 140$ on it bt wat to do? So what I want to know is do the VGA card brand effect on the graphical & accuracy or speed of the VGA or only the chipset is important in that issue?? |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|